HVAC & RTALOS® S60
CO2 Systems Technology
The rising demand of the international community for a green and safe environment has put pressure on the use of HFC refrigerants for HVAC&R applications. At the same time, the use of Carbon Dioxide (CO2) as a refrigerant thrives and installations of CO2 (R-744) refrigeration systems are increasing at a high rate around the world.
CO2 is a natural refrigerant with zero ODP and a GWP of 1, being one of the best choices from an environmental perspective. CO2 refrigeration cycles, require high operating pressures in order to operate efficiently. Several technologies that improve the efficiency of CO2 systems have been established and are under development and optimization (e.g. ejectors, parallel compression, adiabatic cooling, etc.). New technologies lead to new and specialized design conditions that result in different levels of operating and design pressure and temperature.
TALOS®S60 tubes are specifically designed for a maximum allowable pressure of 60bar and feature a reinforced wall thickness in comparison with the standardized TALOS®ACR tube range.
Combined with TALOS®XS for 120/130bar and TALOS®S80 for 80bar, TALOS®S60 for 60bar completes HALCOR’s copper tube portfolio for CO2 applications and provides the HVAC&R designer a full range of choices corresponding to the unique design conditions.
The well-known installation practices of refrigeration copper tubes apply both in systems and in the field (see relevant EN378 standard for guidelines).
- Suitable for ACR systems with a design pressure up to 60bar
- Traditional processing techniques and equipment
- Excellent “cold formability”
- Smooth internal surface enhancing flow rate
- High purity of internal surface
- Stable mechanical properties covering an extensive temperature range
- Excellent brazing ability
- Compatible with standardized ACR fittings
TALOS®S60 tubes are made from Copper-DHP (CW024A, UNS 12200). They are produced according to EN 12735-1 and internal company specifications and comply with the European Pressure Equipment Directive (PED) 2014/68/EU.
|TALOS®S60 for 60bar1|
|Outer Diameter||Wall Thickness|
¹Maximum Allowable Pressure calculation acc. to EN 14276:2020. For service temperatures from -196°C up to 100°C.
Form of supply
- Straight lengths, in bundles (hard copper tubes) and in wooden boxes (soft copper tubes).
- Pancakes-PNC in shrink-wrapped individual plastic bags. Depending on market requirements, products can be placed in cardboard boxes and pallets.
- Spools (LWC) up to 7/8” with or without central support (hard carton). Spool sides may be delivered protected by “flanges” of reinforced cardboard.